Projects - Building - Steadicam

My digital camera needed some accessories, and the steadicam seemed like a perfect addition. Built out of simple parts from a hardware store (and a pie plate from ShopKo), this steadicam makes sure that while I’m taking video the camera stays level and steady.

The pictures should be pretty self-explanatory as far as building it. We were making two at once, so there’s twice as many parts as you’ll need. The parts can be acquired at most hardware stores. The purpose of the pie plate is to create a wide surface so that the steadicam can be set down and used like a tripod without tipping over. It works surprisingly well. One thing that is different from the pictures is that we discovered that the plastic screws were too wobbly, so we went with metal screws instead. The plastic wing nuts are still fine, though.